35' Fuji 35 '77 "Odyssey"
The Fuji 35 was designed by renowned naval architect John G. Alden and was built in Japan to very high standards of craftsmanship. The construction quality is top notch. This example is one of the more desirable later models with aluminum spars and a sloop/cutter rig. ODYSSEY is in generally good condition for her age and is just waiting for a new owner to take pride in sailing this graceful classic cruiser.
V-berth forward followed by a large head with shower on starboard. There is a spacious full height hanging locker to port.
Main cabin has full length settees port and starboard with cabinet storage outboard and below. There is large table that folds up onto the bulkhead when not in use, complete with storage for glassware. There is a nice Dickinson Newport solid fuel heater on the forward bulkhead to port.
The galley is aft to port with sink, Gas Systems 3-burner stove with oven, and icebox with engine-driven holding plate refrigeration system.
On the starboard side of the companionway there is a quarterberth with a slide-out chart table and navigation station featuring a new Lowrance VHF with AIS and a 5" Garmin GPS/plotter on a swing mount.
The cockpit is very spacious and features a beautiful teak-rimmed wheel helm and a compass on a pedestal
3-burner Gas Systems CNG stove with oven and broiler
Pressure and manual fresh and sea water systems
Signet wind speed and direction
Signet speed and distance logs
Signet depth sounder
GPSMap 547 chart plotter
Lowrance Link 8 VHF radio
28’ RCA TV
12V DC and 110V AC
(2) Grp 24 engine start batteries
(2) 6V house batteries 220 amp hrs
Shore power cord
CQR 35 main anchor
Folding stern anchor
Lewmar electric windlass
Dodger, awning, helm and mainsail covers
Anchor and steaming lights
Bow pulpit and rails
Lifelines and stanchions
Dock lines and fenders
Wire standing rigging
Aluminum deck-stepped mast
Shafer roller furling on headsail
(2) Barient 21 winches in cockpit
(3) Barient 31 winches on mast
Main sail (good condition)
Roller furling Genoa (good condition)
Deck fitting in place to add staysail for cutter rig if desired
Emergency engine stop
Raw water sea strainer
Stove and engine fuel shut-off valves
Cockpit engine controls
Acoustic engine area insulation
(1) manual and (1) electric bilge pump
20-gal plastic holding tank
All seller’s personal effects on board are excluded from the sale of this vessel.