2021 Pans Marine N4505m

1. Towing eye: Manufactured from 316 chromium. The inner reel is polyethylene. With 3 inserts placed in the polyethylene body, to increase the strength 5 times.
2. Bow roller: Made of 4mm 316 quality chrome. With two inserts placed in the polyethylene body, the strength has been increased 5 times.
3. Cleats (3 Pieces): Manufactured from 316 chromium, it has a special design that maximizes durability. The base of the design is 3mm, the reel is 22mm and the top is 4mm. With extra inserts placed in the polyethylene body, the strength has been increased 5 times.
4. Anchor locker: Produced in polyethylene by rotation moulding. Has a 30-litre capacity.
5. Chrome railing (4 Pieces): With a radius of 22mm, 3mm chrome pipe. 65cm long.
6. Storage box + seat (2 Pieces): Made of polyethylene with rotation moulding. Each one has a volume of 60 litres.
7. Deck mat: For added comfort and minimizes slippage with its specially designed surface.
8. Rowlocks (2 pieces): These are not fixed and can be added by the client if required
9. Rope (2 Pieces): Each one is 7 mm thick and five m long. Rope ends are covered with special waxing technique.
10. Water evacuation stopper: Allows the water on the boat to be discharged out of the drain channels when desired.
11. Storage lockers (2 Pieces): Integrated within the body and is capped with a polyethylene seat cover. Each one has a volume of 50 litres.
12. Chrome transom plate (1 Piece): Made of 3mm 316 quality chrome. A ridged surface has been created to prevent the engine from sliding.
13. Engine transom (1 Piece): 18mm plywood is encased into the rotational polyethylene. By preventing direct contact with the water, it becomes equally as long lasting as the polyethylene body.
14. Wall cap (2 Pieces): Suitable to use as an extra storage area. It can be used to access the area between the walls.

Epropulsion - Spirit 1.0 Plus Electric Outboard Short Shaft - Tiller Steer (£1,800.00 Inc Vat)

Extreme Trailers

EXT750 MAXI BUNK - £1,466.00 Inc Vat

Extreme 750kg Bunked Galvanised Boat Trailer

• Suitable for -
• Dinghies up to 16' (with overhang)
• ​Hard Boats up to 14'
• ​Ribs up to 5m

With a trailer weight of 145kg it can take a boat weight up to 605kg

​Designed and manufactured in the UK.

​Standard features include:

• Heavy duty frame

• Waterproof sealed bearings

• Pair of 1.8m carpeted bunks 

• Heavy duty keel rollers

• Height adjustable winch post

• 10" wheels

• 48mm jockey wheel with pressed clamp

• 1000lb  winch

• Light board on extendable bars

Overall length: 4.75m

Overall width:  1.57m

Thames Boat House Ltd offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel or it's suitability for use. A buyer should instruct his agents and surveyors to investigate such details as the buyer desires validated. Unless otherwise stated the vendor is not selling in the course of business and this vessel is offered subject to prior sale, price change, or withdrawal without notice.